中/EN

产品与方案
Number of views:
1000

40kw Ultra constant power module UX100040

Retail price
0.0
RMB
Market price
0.0
RMB
Number of views:
1000
Product serial number:
Quantity
-
+
Stock:
0
1
Module introduction
Parameters
Superior performance advantages
Product features

UX100040 ultra constant power module is a charging pile module developed for the pain point of the charging pile industry. It has two leading features: full load working during ultra-high temperature and ultra-wild constant power range. At the same time , high reliability, high efficiency, high power factor, high power density, wide output voltage range, low noise, low standby power consumption and good EMC performance are the main characteristics of the module.

We could not find any corresponding parameters, please add them to the properties table

Full load working during as high as 60℃

Constant power output between 300V-1000V

ITEM SPECIFICATIONS
Basic specifications Dimensions 85mm(H)×360mm(W)×429mm(D)
Weight ≤ 20kg
Efficiency (full load) >95.5%
Standby Power Consumption < 12W
Cooling Mode Forced air cooling
Communications bus protocol CAN bus
No. of Parallel Modules ≤ 60pcs
Indicator Green: normal operation    Yellow: alarm    Red: fault
Input characteristics Input Voltage 285Vac ~ 475Vac,three phase  + Protective Earth
Input Current < 60A 
Grid Frequency 45Hz ~ 65Hz
Power Factor ≥ 0.99
ITHD ≤ 5%
Output characteristics Output Power 40kW@output voltage > 300Vdc
Voltage Range 20Vdc ~ 1000Vdc,  default value:1000Vdc
Current Range 0A~ 100A
Voltage Tolerance ≤ ±0.5%
Current Tolerance ≤ ±1%
Current Sharing Imbalance ≤ ±5%
Ripple voltage peak value coefficient ≤ 1%
Environmental specifications Operating Temperature - 40℃~+ 75℃,output derating at above 60℃
Storage Temperature - 40℃~+ 75℃
Relative Humidity ≤ 95% RH,non-condensing
Altitude ≤ 2000 m. Full power; ≥ 2000 m, the operating temperature decreases by 1℃ for each additional 100 m.
MTBF > 500,000hours
Protection specifications Input Over/Undervoltage Protection Automatic recovery after power-off
Output Overvoltage  Protection Manual recovery after power-off
Overcurrent and Short-circuit Protection Manual recovery after power-off
Overtemperature Protection Automatic recovery after power-off

 

Previous
Next